Monster14™ Cup Kit (9/2 Series Torches)
(Select Electrode Size & Quantity From Options Above)
Monster14™ Nozzle & Gas Lens Kit. #14 = 7/8" (22.2mm) Orifice x 1" (25.4mm) Long. Everything you need in one kit!
Monster Cups are engineered to deliver a coherent stream of shielding gas for improved weld-quality and consistency.
Perfect for welding Stainless Steel, Chromoly, Docol R8, etc., then these cups may be exactly what you need to improve gas coverage, arc stability, tungsten stick-out, and visibility. Monster™ Nozzles are used by top metal fabricators worldwide!
SAVE Over $15 When You Purchase 2 Cups With Your Gas Lens Kit
Kit Includes:
| Part # | A-MN14-2-116 | A-MN14-2-116X2 | A-MN14-2-332 | A-MN14-2-332X2 |
|---|---|---|---|---|
| Monster14™ Cup w/ Varying Mesh Diffuser |
1 | 2 (20% Savings) |
1 | 2 (20% Savings) |
| Gas Lens | 1/16" (1.6mm) | 1/16" (1.6mm) | 3/32" (2.4mm) | 3/32" (2.4mm) |
| Wedge Collet | 1/16" (1.6mm) | 1/16" (1.6mm) | 3/32" (2.4mm) | 3/32" (2.4mm) |
| Teflon Insulator | 1 | 1 | 1 | 1 |
| Short Back Cap | 1 | 1 | 1 | 1 |
| Medium Back Cap | 1 | 1 | 1 | 1 |
Note: To ensure optimal performance all Monster™ nozzle kits are built with Arc-Zone's Performance Proven™ TIG torch parts.
- Monster14™ nozzles are made of durable, non-reactive ZTA (Zirconia Toughened Alumina) ceramic with 316L stainless steel gas diffuser installed
- Thread-on design securely seals to Teflon heat shield, No o-rings, No gas leaks, No high-freq arc-outs, No drama
- Flow-tested Gas Lens Collet Body
- Leak-tested Medium Back Cap
- Leak-tested Short Back Cap
- Heavy-Duty Wedge Collet
- High Heat Glass Filled Teflon Insulator
***TIG Torch shown is Not Included and Sold Separately***
Monster™ Cup Best Practices, Set-Up Tips, Do's & Don'ts!
- The Monster™ Cup works best with Arc-Zone's high-quality gas lens collet bodies
- The Monster™ Cup is designed for Argon flow rates between 15-30 CFH (cubic feet hour)
- Do Not Exceed 175 amps for extended periods of time!
- The Monster™ Cup is Not designed for welding with AC current!
- Minimum tungsten stickout of 3/4" (19mm) -- Shorter stickout may result in damage to the screen stack
- Use a medium or short back cap ONLY. (Long back caps are known to trap atmosphere in the top of the cap)
- Do not adjust the positioning, or modify the Screen Stack in any way
Monster™ nozzles are designed for precision TIG welding applications where increased shield gas coverage and tungsten stickout are needed. They are not designed for heavy-industrial pipe welding applications.
Arc-Zone does not make any claims or guarantees of weld-quality improvements, or level of shield gas coverage. Results may vary, due to: weld station set-up, material preparation, gas quality, gas flow rates, flow meter type, gas hose material, welding machine, TIG torch, operator’s torch handling technique, etc.
Compatible with popular TIG torch models including: A125 (WP-9), W250 (WP-20), W280 (CS310) and CK 2 Series.
Monster #14 = 7/8" (22.2mm) Cup Kit for 17, 18, 26 & 3 Series Torches
Starting at
$66.00 - $82.78
Monster #14 = 7/8" (22.2mm) - Cup Only -
Starting at
$36.30 - $55.00
Monster #10 = 5/8" (15.9mm) Cup Kit for 9, 20, & 2 Series Torches
Starting at
$26.40 - $41.80
Have a question? ask our team
(7) Reviews
-
Out of the Monster series nozzles the 14 is the…
Out of the "Monster series" nozzles the #14 is the most versatile one. The size is about perfect for almost all of my stainless welding I do. When welding stainless, the only reason I might switch to a different cup would possible be a outside corner joint where the shielding gas doesn't puddle at all. in that case I would run either the Monster #16 or #24. The screen stack has to be the best aspect of this cup. It creates such a great diffused gas flow that allows for exceedingly long stick out if necessary. With such a great screen stack I feel as though I don't need to have my argon flow as high as i would have thought i would need to, I run between 20-30CFH depending on the application. If you want to see this cup in action check me out on Instagram @wicked_welding
Wes M. | Dec 2nd 2016
Write a Review
