JW Signature Series Shorty Straight Welding Table Grounding Kit – 350 Amp

Add a dedicated straight quick-connect welding ground directly to your workbench or fixture table.
The JWS-Shorty-TGS Bolt-On Straight Table Grounding Kit provides a clean and convenient way to connect your welding ground to compatible welding tables, fixture tables, and workbenches. Designed for tables with 5/8" (15.9mm) holes, the kit can be mounted through compatible holes on the top or side of the table.

The straight female connector creates an easy-to-access connection point for your welding ground lead. Instead of repeatedly attaching and removing a traditional ground clamp from the table, connect your compatible ground cable using the included male LC-40 cable connector.

Key Features

• Dedicated Table Ground Connection: Creates a convenient grounding point directly on your welding or fixture table.
• Straight Connector Design: Provides an inline connection for clean cable routing and easy access.
• 350 Amp Connector: Includes a straight LC-40 female connector rated at 350 amps.
• Fits 5/8" Table Holes: Designed for workbenches and fixture tables with 5/8" (15.9mm) holes.
• Top or Side Mounting: Can be installed through compatible holes on the top or sides of the table.
• Quick Cable Connection: Connect and disconnect your compatible welding ground lead without repeatedly attaching a conventional ground clamp to the table.
• Heavy-Duty Cable Compatibility: Included male LC-40 connector accepts cable up to #1/0 – 2/0 (50–70mm²).
• Mounting Hardware Included: Includes high-quality 1/2" mounting hardware.

Kit Includes

Designed for 5/8" Fixture Tables

The JWS-Shorty-TGS is designed to bolt directly into a compatible 5/8" (15.9mm) fixture-table hole. This provides a simple way to add a dedicated grounding connection to compatible modular welding tables and workbenches.

Depending on your table design and preferred cable routing, the kit can be installed through a compatible hole on either the top or side of the table.

Straight Connector Design

The JWS-Shorty-TGS uses a straight LC-40 female connector. This configuration is useful when an inline cable connection works best with your table layout and preferred ground-cable routing.

For shops setting up dedicated welding stations, the straight design provides a clean connection point while keeping the ground lead easy to connect and disconnect.

Why Add a Dedicated Table Ground?

A traditional ground clamp must be attached to a suitable location whenever the welding setup changes. Adding a dedicated connector to the table gives the operator a consistent location for connecting the welding ground lead.

This can help keep the welding area organized and make it faster to connect or disconnect the ground cable when changing leads, machines, or workstations.

Quick-Connect Ground Cable Setup

The kit includes both sides of the connection. The straight LC-40 female connector mounts to the table, while the included male LC-40 connector installs on a compatible welding ground cable.

Once installed, the ground cable can be connected directly to the table-mounted grounding point for a convenient welding setup.

Common Applications

• Welding fixture tables
• Fabrication tables
• Welding workbenches
• Modular fixture tables with 5/8" holes
• Fabrication shops
• Production welding stations
• Maintenance and repair workstations
• Custom welding table setups

Frequently Asked Questions

What does the JWS-Shorty-TGS do?
It adds a dedicated straight quick-connect grounding point to a compatible welding table, fixture table, or workbench.

What size table holes does it fit?
The kit is designed for tables with 5/8" (15.9mm) holes.

Can it be mounted on the side of a welding table?
Yes. The kit is designed for installation through compatible top or side table holes.

What type of connector does it use?
The kit includes a straight LC-40 350 Amp female connector for the table and a matching male LC-40 cable connector.

What size welding cable will the included connector accept?
The included male LC-40 connector accepts welding cable up to #1/0 – 2/0 (50–70mm²).

Does the kit include mounting hardware?
Yes. High-quality 1/2" mounting hardware is included.

Does the kit include the welding ground cable?
No. The kit includes the table-mounted female connector, male cable connector, and mounting hardware. The welding cable itself is not included.

What is the difference between the straight and angled Shorty table grounding kits?
The JWS-Shorty-TGS uses a straight female LC-40 connector. Choose the straight configuration when an inline cable connection best matches your table layout and preferred cable routing.