Mounting Barrel – 3" (76 mm) for W-250 / WP-22A Automation TIG Torch

3-inch (76 mm) replacement mounting barrel for Miller Weldcraft W-250 (WP-22A) Automation TIG torches.
The Miller Weldcraft 22-8B Mounting Barrel is a replacement component designed for the W-250 (WP-22A) Automation TIG Torch. Measuring 3" (76 mm) in length, this mounting barrel is intended for compatible automation torch assemblies.

Designed for use with the W-250 (WP-22A) torch configuration, the 22-8B provides a replacement option when servicing, repairing, or rebuilding automated TIG welding equipment.

Key Features

• Miller Weldcraft Replacement: Mounting barrel designed for the compatible Weldcraft automation TIG torch assembly.
• 3" (76 mm) Length: Short mounting barrel configuration for the compatible torch.
• W-250 Compatibility: Specifically designed for the W-250 Automation TIG Torch.
• WP-22A Compatibility: Fits the specified WP-22A automation torch configuration.
• Replacement Component: Used when replacing an existing mounting barrel during torch maintenance or repair.
• Automation Torch Application: Intended for use in compatible automated TIG welding torch assemblies.
• Part Number 22-8B: Identified by its replacement part number for straightforward ordering.

Compatible TIG Torch

• Miller Weldcraft W-250 Automation TIG Torch (WP-22A)

Compatibility Note: Verify that your existing torch requires the 22-8B mounting barrel measuring 3" (76 mm) before ordering. Not all automation TIG torch assemblies use the same mounting components or barrel lengths.

3" (76 mm) Replacement Mounting Barrel

The 22-8B mounting barrel measures 3 inches (76 mm) in length and is intended for use with the W-250 (WP-22A) Automation TIG Torch.

When replacing an existing mounting barrel, matching the correct part number and length is important for ensuring compatibility with the torch assembly.

The 22-8B provides a shorter mounting barrel option for applications requiring the 3" configuration, without replacing the complete TIG torch.

22-8A vs. 22-8B Mounting Barrels

Both mounting barrels are designed for the W-250 (WP-22A) Automation TIG Torch. The primary difference is their overall length.

Important: Select the correct barrel length for your existing torch configuration. The 22-8A and 22-8B are different lengths and should not be treated as interchangeable without confirming the requirements of your setup.

Designed for Automation TIG Welding

Automation TIG welding systems rely on properly matched torch components for consistent setup and operation. The 22-8B mounting barrel is designed for the specified W-250 (WP-22A) automation torch assembly.

Whether servicing an existing torch or replacing a damaged mounting component, selecting the correct replacement part helps maintain the intended torch configuration.

Common Applications

• W-250 Automation TIG Torch maintenance
• WP-22A torch component replacement
• Automated TIG welding equipment repair
• Automation torch servicing
• Replacement of worn or damaged mounting barrels
• Industrial TIG welding equipment maintenance
• Automation torch assembly repair
• Applications requiring a 3" mounting barrel

Frequently Asked Questions

What is the Miller Weldcraft 22-8B?
The 22-8B is a 3" (76 mm) replacement mounting barrel for the Miller Weldcraft W-250 (WP-22A) Automation TIG Torch.

How long is the 22-8B mounting barrel?
The mounting barrel measures 3 inches (76 mm) in length.

What TIG torch does this mounting barrel fit?
This component is designed for the W-250 (WP-22A) Automation TIG Torch.

What is the difference between the 22-8A and 22-8B?
The main difference is the mounting barrel length. The 22-8A measures 7" (178 mm), while the 22-8B measures 3" (76 mm). Both are specified for the W-250 (WP-22A) Automation TIG Torch.

Can I replace a 22-8A with a 22-8B?
These mounting barrels have different lengths. Confirm the required barrel length and torch configuration before substituting one part for the other.

Is this a complete TIG torch?
No. This listing is for the 22-8B mounting barrel only, not a complete automation TIG torch.

Can I use this with other Weldcraft TIG torches?
The specified application is the W-250 (WP-22A) Automation TIG Torch. Verify compatibility before using it with another torch model or configuration.

When should I replace the mounting barrel?
Replace the mounting barrel if the existing component becomes worn, damaged, or requires replacement during maintenance of the compatible torch assembly.

What is the replacement part number?
The Miller Weldcraft replacement part number is 22-8B.