LDP-95M Machine Connector - Black/Red Set
Large DINSE Style Connector, 1/2" (12.7mm) pin size. These 500 Amp rated cable connectors attach to the cable using a single, oval-point screw, and accept cable sizes #2/0 - 4/0 (70-95mm2), and have a beveled collar on the machine end to allow it to fit nearly any machine.
These connectors are perfect for making your own ground cables and stick welding leads.
500 Amp Large Dinse Style Machine Connector - Red
Starting at
$18.00
500 Amp Large Dinse Style Machine Connector - Black
Starting at
$18.00
350 Amp Large Dinse Style Machine Connector - Black/Red Set
Starting at
$30.00
Have a question? contact us for expert help
(3) Reviews
-
I ordered a set of these for future proofing…
I ordered a set of these for future proofing purposes and because I didn't want to tear apart the OEM cables. They were easy for a first timer to figure out and assembled nicely, fit my machine like i'd hoped. The boot is a little looser at the end than i'd prefer but it tends to tighten up after the cabling is all finished and the boot slides on. I don't recommend man handling these, I still find the fitting tolerance of the boot suspect (could slip off at a bad time).
james h. | Jun 22nd 2018
-
The fitting tolerances of the boot are a little…
The fitting tolerances of the boot are a little sloppy near the tip when the connector fully seats itself. There's still enough slop for the connector to wiggle around inside the boot after it's fully assembled. That all being said, works as expected and fits my AHP TIG box just fine! It's easy to put together and take apart unlike the OEM connectors I have. It would be nice if they included some sort of crimp sleeve for this.
james h. | Jun 12th 2018
-
Great quality. Easy set up and works as…
Great quality. Easy set up and works as advertised.
Matthew C. | Jul 20th 2017
Write a Review
