Description
Miller® Compatible Large 14 Pin Circular Plug Amp Control.
Side-to-Side Rotary Amperage Control Mounts to TIG Torch Handle with Nylon Zip Ties, or Can Be Hand Held. Ideal for Out-of-Position TIG Welding.
Complete Kit with 27', 52', 80' or 100' Control Cable and 14 Pin Connector for Miller® Power Supplies.
| Part # | Cable Length |
|---|---|
| A-MFTC-14 | 27' (8.2m) |
| A-MFTC-14-52 | 52' (15.8m) |
| A-MFTC-14-80 | 80' (24.3m) |
| A-MFTC-14-100 | 100' (30.4m) |
Note: Your Miller® machine may have a "Large" 14 pin plug connector with only 5 pins installed, If you look you’ll see that there is 14 holes -- some new plugs have all 14 pins installed with only five active.
Note: Miller also makes a smaller “5 pin” plug with 5 pins installed.
Direct Connects To:
AeroWave, Dimension 302, 400, 452, 650, 652 & 1000
Dynasty DX, 200 and 300 (SD,DX,LX)
EconoTig
GoldStar 300SS, 400SS, 500SS, & 600SS
GoldStar 302, 452, & 652
Invision 345MP, 456P & 456MP
MaxStar 91, 152, 175, 200 (SD,DX,LX, STR) MaxStar DX 200 & 300 (SD,DX,LX)
Maxtron 300 & 450, MK VI, Phoenix 456
ShopMaster 300
Synchrowave 180SD, 250, 300 350LX, 351, 500 & 500P
TIG Runner, XMT 200, 300 & 304, CST 250, PipePro 304
Pro 300, Pro 350D
Note: If you use power supplies other than Miller® or if you prefer a different style switch -- check out our In-Line/North-South offering -- or contact Arc-Zone® for a solution to meet your specific needs.
