| Part # | Cross Reference | Side 1 | Side 2 | CGA Designation |
|---|---|---|---|---|
| WES-AW-407 | A-424 | 5/8"-18 RH Male Swivel Nut | 5/8"-18 RH Female | CGA-032 |
90 Degree Connector Fitting for Argon/Helium.
Note: This is a compression type coupler with a machined brass seating face on each end. Do not use any pipe dope, teflon tape or other type products.
Should Be Standard with New Welders
Exactly what I needed on my MIG welders for eliminating clearance issues on my Lincoln Electric welders. My old Pro-MIG 140 needed this elbow because the welder port was inline with the gas cylinder and right up against the cylinder due to welder gun cable issues by the front handle. My new 180i MP DV Weld-Pak didn’t have the clearance issues as my previous welder, but being able to have the elbow pointed down really made for a clean routing of the hose from the regulator to the machine.
Used this Nifty 90-degree coupler on my Everlast…
Used this Nifty 90-degree coupler on my Everlast 250EX tig welder since the gas Port is in the center of the machine in the rear of the machine so I can mount my tank on it when I made my cart, works great and looks of high quality!
Great fit! Bolted right up right iut of the…
Great fit! Bolted right up right iut of the package.
This was the ticket for my Everlast 255ext. The…
This was the ticket for my Everlast 255ext. The gas port is in the center of the machine so it doesn't fit on the cart too well without this, as the hose pokes into the gas bottle.
As advertised allows for a better fit for my…
As advertised, allows for a better fit for my welder/cart/bottle
Works perfectly! Every welder should come from…
Works perfectly! Every welder should come from the factory with this, so it doesn’t pinch the hose to the bottle.
