null

Piranha II Custom Electrode Arm with 1/8" Guide Hole

Four Electrode Guide Sizes In One Custom Arm.
The Diamond Ground Products DGP-PG1509 is a custom electrode arm for the Piranha II tungsten grinder. It includes an additional 1/8" (3.2mm) guide hole alongside the three standard sizes.

.040" (1.0mm) - 1/16" (1.6mm), 3/32" 2.4mm) & 1/8" (3.2mm)

Review the manufacturer's use limits below before ordering.

Important: 1/8" (3.2mm) Tungsten Use

Diamond Ground advises that the Piranha II is not designed to grind 1/8" tungsten. Grinding this diameter adds stress to the motor and may cause premature motor failure.

The manufacturer recommends the Piranha III tungsten grinder instead. This custom arm is a last-resort option for customers who grind 1/8" tungsten only infrequently. Adding the guide hole does not increase the Piranha II motor's capacity.

Key Features

  • Four guide holes: .040", 1/16", 3/32" and 1/8" in one electrode arm. The 1/8" hole is subject to the use limits above.
  • Piranha II application: Custom electrode arm configuration for the Diamond Ground Products Piranha II tungsten grinder.
  • Specific part number: DGP-PG1509 identifies this four-hole configuration.

Compatibility & Part Selection

This arm is for the Piranha II tungsten grinder. If you only need .040", 1/16" and 3/32" guide holes, see the DGP-PG1374 standard electrode arm.

Not sure which arm your grinder uses? Contact Arc-Zone with your grinder model and existing part number before ordering.

What's Included

  • One DGP-PG1509 custom electrode arm with .040", 1/16", 3/32" and 1/8" guide holes.

Tungsten grinder and electrodes sold separately.

Frequently Asked Questions

How is DGP-PG1509 different from DGP-PG1374?

DGP-PG1374 has three guide holes: .040", 1/16" and 3/32". DGP-PG1509 adds a fourth hole for 1/8" tungsten, subject to the manufacturer's motor-stress warning above.

Can I use this arm for regular 1/8" tungsten grinding?

Diamond Ground recommends the Piranha III for 1/8" tungsten. This custom Piranha II arm is only a last-resort option for infrequent use because grinding 1/8" tungsten can stress the Piranha II motor and cause premature failure.

Do I need to choose a hole size when ordering?

No. This part includes all four listed guide holes in one arm.

(0) Reviews

Write a Review

There are no reviews associated with this product.

Piranha II Custom Electrode Arm with 1/8" Guide Hole

$265.00
(0) Reviews
Adding to cart… The item has been added
  • Fast Turnaround on
    in Stock Items

  • 30 Day Returns - Buy
    with Confidence

  • We Ship
    Worldwide