Description
SHT-S2-000830 Shipping Bracket w/ Fastening Plate
The Shipping Bracket has a load bearing capacity of 1,800 kg and is used for transport of tables and other heavy components safely and easily. It is fastened quickly using 4 clamping bolts (SHT-S2-280510). Lateral forces should be avoided on the lifting bracket eye nut of SHT-S2-000830 as this will decrease its load capacity.
With all lifting brackets, users must observe general rules and regulations for material handling safety. Users must ensure Eye Nut are fully threaded and sit flat on the bearing surface. Users must ensure clamping bolts are fully seated onto the lifting bracket so that bolts can achieve full clamping capacity. Objects should not be lifted further than 100 mm off the ground and personnel are not allowed under objects being lifted or moved.
Please consider following safety instructions:
- Ring nuts should be completely bolted.
- Ring nuts should bear flat and completely on support surface.
- Length of mating thread has to be sufficient.
- Lateral pull should be avoided.
Part Number | Load-Bearing Capacity | Length | Width | Height | Weight |
---|---|---|---|---|---|
SHT-S2-000830 | 1,800kg (3,960lbs.) | 150mm (5.9") |
150mm (5.9") |
25mm (1.0") |
4.7kg (10.4lbs) |
Additional Information
Accessory Type: |
Stops/Squares |
Table Brand: |
Siegmund |
Table Hole Dia.: |
28 mm |