Adjustable Angle Bracket – 5/8" Fixture Table System

Set, lock, and repeat precise angles from 10° to 150° for welding and fabrication setups.
SHT-T50350 Adjustable Angle Bracket gives fabricators an adjustable alternative to a fixed-angle square. Set the bracket to the angle required for the job, lock it securely in position, and use the multiple fixture holes and slots to position and hold your workpiece.

Designed for 5/8" fixture table systems with 2" hole spacing, the SHT-T50350 provides a wide 10° to 150° adjustment range and up to 150 lb of holding force for dependable workholding during welding, fitting, and assembly.

Why Choose the SHT-T50350?

• 10° to 150° Angle Adjustment: Set individual angles throughout a wide adjustment range for custom fabrication setups.
• Repeatable Positioning: Engraved angle scale makes it easier to return to the same setup for repeat jobs.
• Secure Angle Locking: Lock the selected angle in place using a 5/16" Allen key.
• 150 lb Holding Force: Provides dependable workholding for welding and assembly applications.
• 5/8" Fixture Holes: Designed for compatible 5/8" fixturing systems.
• 2" Hole Spacing: Matches compatible BuildPro and other 5/8" fixture table layouts.
• Multiple Mounting Positions: Fixture holes and elongated slots provide flexibility when positioning clamps and workpieces.
• Steel Construction: Built for demanding fabrication and welding environments.
• Black Oxide Finish: Durable surface finish for regular shop use.
• HV550 Surface Hardness: Hardened working surfaces help provide durability for repeated fixturing.

Set the Angle You Need

Not every fabrication job is built around 45° or 90° angles. The SHT-T50350 allows you to set an individual angle from 10° through 150°, giving you more flexibility when fitting frames, tubing, brackets, supports, and other angled assemblies.

Use the engraved protractor scale to set the desired angle, then secure the adjustment using a 5/16" Allen key. Once locked, the bracket provides a stable reference for positioning and holding the workpiece.

Built for Repeatable Fabrication

The adjustable design is especially useful for jobs where the same angle needs to be produced multiple times. Instead of measuring and setting each workpiece individually, the bracket can be locked at the required angle and used as a repeatable fixture reference.

This can help reduce setup time and improve consistency across multiple parts or assemblies.

Multiple Fixturing Positions

The SHT-T50350 includes multiple 5/8" fixture holes and elongated slots along its arms. These mounting points give you several ways to position compatible table bolts, clamps, stops, and other fixturing components.

The combination of adjustable angle positioning and multiple mounting locations makes the bracket useful for both simple angled joints and more complex fabrication setups.

150 lb Holding Force

Strong Hand Tools rates the SHT-T50350 for up to 150 lb of holding force, providing a solid fixture reference for positioning workpieces during fabrication, tack welding, fitting, and assembly.

Always make sure the bracket is properly secured to the fixture table and the angle adjustment is fully locked before applying a load or beginning work.

Dimensions

Common Applications

• Angled welding setups
• Tube and square-tube fabrication
• Frame fabrication
• Custom brackets and supports
• Repeatable production setups
• Fitting and tack welding
• Assembly work
• Non-90° joints
• Custom fabrication fixtures
• 5/8" welding table setups

Adjustable vs. Fixed Angle Square

Before Ordering

This bracket is designed for 5/8" fixture table systems. Confirm that your welding table and fixturing accessories are compatible with 5/8" holes and 2" hole spacing before ordering.

Frequently Asked Questions

What is the SHT-T50350 used for?
The SHT-T50350 is an adjustable fixturing bracket used to position and hold workpieces at specific angles during welding, fabrication, fitting, and assembly.

What angles can I set?
The bracket can be adjusted to individual angles from 10° to 150°.

How do I lock the angle?
Set the bracket using the engraved angle scale and then lock the adjustment in place using a 5/16" Allen key.

What size fixture table does it fit?
The SHT-T50350 is designed for compatible 5/8" fixture table systems with 2" hole spacing.

How much holding force does it provide?
Strong Hand Tools rates the bracket for up to 150 lb of holding force.

How long is the bracket?
Each arm is approximately 11" long.

What is the bracket made from?
The SHT-T50350 is constructed from steel with a black oxide finish and has a listed surface hardness of HV550.

Can I use it for repeat production work?
Yes. The adjustable angle scale and locking mechanism make it useful for creating repeatable setups where multiple parts need to be positioned at the same angle.

Can it be used at 90°?
Yes. Since the adjustment range extends from 10° to 150°, the bracket can be set at 90° as well as a wide range of other angles.