null

PowerTIG 200DV

The PowerTIG 200DV has been a staple in the Everlast lineup since 2009, favored by light and medium fabricators for its simplicity and advanced features. The latest model is more efficient and durable, offering improved performance and power consumption. It pairs perfectly with the new stackable PowerCool 375 cooler, enhancing its appeal.

This portable TIG welder operates on both 120V and 240V single-phase power (50/60Hz) and can be used with a generator rated for 8500W surge watts and "clean power." If you're looking for a reliable, portable TIG welder for daily use, the PowerTIG 200DV is a strong choice.

Key updates include HV Start for more reliable arc starts, Fan On Arc technology to activate fans only when welding or during overheating, and Cooler Control Technology for better cooling management.

Features:

  • Reliable IGBTs for stable inverter performance
  • 120V/240V Dual Voltage input
  • Low as 5 Amp start for TIG in DC/ 20 Amp in AC.
  • Pre flow and Post flow control for maximum shielding gas protection before and after
  • Color coded controls are easy to identify and understand
  • Lift start function for use when HF is not desireable
  • AC cleaning range adjustment of 30-70% offers good control over cleaning/penetration ratio
  • 240V Outlet in rear for optional WC 300 water cooler
  • Pre flow and Post flow control for gas
  • Arc force control (DIG) for stick helps to reduce spatter and improve arc performance
  • Pulse frequency ranges from .5-150 Hz in AC and DC mode
  • HV Start.
  • Fan on Arc (As demanded). Fan only comes on while welding, and stays on briefly after welding before shutting off. It also comes on when the unit over heats and reaches it's duty cycle limits.
  • Cooler control starts cooler when arc is struck. Cooler shuts down after arc is terminated.

Comes Complete With:

  • 26 series Air-Cooled TIG Torch with 12.5 ft. cables and 35 DINSE connector
  • Torch Switch TIG with 12.5 ft. cable and 7 Pin male plug for 2T/4T operation
  • Stick Electrode Holder with 10 ft. cable and 35 DINSE connector
  • Ground Clamp with 10 ft. cable and 35 DINSE connector
  • Power Pedal TIG Deluxe 22K
  • RH-191 Argon Regulator with Hose
  • 240/120V Pigtail Adapter
  • 6 ft. Input Power Cable with NEMA 6-50 plug
  • Starter Consumable Kit (tungsten not included)
  • (Cooler and Cart NOT included)
  • IGBT Type

    Individual IGBT
  • Inverter Type

    Digital/Micro-controlled
  • Output Type

    AC/DC TIG, DC Stick
  • Voltage/Phase

    DUAL VOLTAGE 120/240 1 PHASE
  • Max Rated TIG Amps

    120V: 125A // 240V: 200A
  • Max Rated Stick Amps

    120V: 125A // 240V: 160A
  • TIG Amps @ Rated Duty Cycle (120V)

    125A/15V @ 60% Duty Cycle/ 40º C // 100A/14V @ 100% Duty Cycle/ 40º C
  • TIG Amps @ Rated Duty Cycle (240V)

    200A/18V @ 60% Duty Cycle/ 40º C // 160A/16.4V @ 100% Duty Cycle/ 40º C
  • Stick Amps @ Rated Duty Cycle (120V)

    100A/24V @ 35% Duty Cycle/ 40º C // 80A/23.2V @ 60% Duty Cycle/ 40º C // 60A/ 22.4V @ 100% Duty Cycle/ 40º C
  • Stick Amps @ Rated Duty Cycle (240V)

    160A/26.4V @ 35% Duty Cycle/ 40º C // 130A/25.2V @ 60% Duty Cycle/ 40º C // 100A/24V @ 100% Duty Cycle/ 40º C
  • Max Inrush ( I1MAX ) Amps

    120V: 35A // 240V: 31A
  • Maximum Rated (I1EFF ) Input Amps

    120V: 24A // 240V: 23A
  • OCV

    TIG: 75V // Stick: 75V
  • TIG Output Range DC

    120V: 5A-125A/10.2V-15V // 240V: 5A-200A/10.2V-18V
  • TIG Output Range AC

    120V: 20A-125A/ 10.8V-15V // 240V: 20A-200A/10.8V-18V
  • Stick Ouput Range DC

    120V: 5A-100A/ 20.2V-24V // 240V: 5A-160A/20.2V-26.4V
  • Stick Function

    Adjustable Arc Force Control
  • Stick Hot Start Type

    Auto Adaptive Hot Start
  • 6010/Cellulose Capable

    Limited to 6011
  • Minimum Amp DC TIG Start

    5A
  • Minimum Amp AC TIG Start

    20A
  • TIG Start Type

    Lift TIG // HF
  • HF and Lift

    HV Start (Solid State HF Type) // Lift Start with Remote
  • Memory

    No
  • End Amp Range

    Fixed Minimum
  • Upslope Time

    Fixed Minimum
  • Down Slope Time

    0-25 Seconds
  • Preflow Time

    0-10 Seconds
  • Post Flow Time

    0-25 Seconds
  • TIG Pulse

    Yes
  • Standard DC Pulse Frequency

    .5-150Hz
  • Standard AC Pulse Frequency

    .5-150Hz
  • Pulse Time On (Duty Cycle)

    10-90%
  • Pulse Amp Range

    5-95% of welding amps
  • AC Frequency (Hz)

    20-250Hz
  • AC Balance Range

    20-80% of Electrode Positive
  • AC Wave Forms

    Advanced Square Wave
  • Remote Control

    2T/4T
  • Foot Pedal

    Standard
  • Weight

    25 lbs
  • Dimensions (LxWxH)

    16 in x 7 in x 13 in

Have a question? contact us for expert help

Review(0) Reviews

Write a Review

There are no reviews associated with this product.

PowerTIG 200DV - Efficient, Reliable AC/DC TIG, DC Stick Welder

Now: $1,079.00
Was: $1,349.00
(0) Reviews
Adding to cart… The item has been added
  • In Stock &
    Ready to Ship

  • 30 Day Returns - Buy
    with Confidence

  • We Ship
    Worldwide