Welding
Welding Machines & Accessories – Built for Pros, Backed by Experience
At Arc-Zone.com, we don’t just sell welding equipment—From the shop floor to the job site, metal fab is what we know, what we do, and what we’re built for. With decades of experience in the field, we know what it takes to lay down clean, precise welds, cut through metal with efficiency, and fine-tune your setup for peak performance. Whether you're a precision TIG welder...
- Welding Machines
- TIG (GTAW)
- Tungsten Electrodes
- Plasma
- MIG (GMAW)
- Stick (SMAW)
- Oxy Fuel
- Gas Flowmeters
- Connectors & Clamps
- Plugs, Adapters & Converter Cables
- Water Coolers
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
180° Offset Torch Packages w/ Quick Connect & Rack
$2,551.34 - $2,638.68PWH/M 4A Torch Package, 180 Degree Offset Machine Torch Body with Lead Set, Mounting Barrel, Rack Assembly and Quick-Disconnect Installed. This is a Genuine Arc-Zone Performance Proven™ Replacement for Thermal Dynamics® 4A Plasma Arc Welding...$2,551.34 - $2,638.68 -
3/32" Tapered Tip
$1.5017ST-3/32 Priced Individually, Sold in Packages of 25. Tapered Tip, .3/32".MIG-17ST-332$1.50 -
Lenco 80 Amp Small Gas-Thru DINSE Connector For 8 & 24 Torches
$34.00LEN-LDTSI-24-M Lenco Small Gas-Thru DINSE Connector, .355" (9.0mm) Male End. For 8 & 24 Series Torches 80 Amp Air-Cooled TIG Torches with One-Piece Power Cable Connection (3/8" x 24 Right Hand Female Nut) to Power Supplies with...LEN-LDTSI-24-M$34.00 -
Lenco 150 Amp Small Gas-Thru DINSE Connector
$30.02LDTSI-917-F Lenco Small Gas-Thru DINSE Connector, .355" (9.0mm) Male End. For 150 Amp Air-Cooled TIG Torches with One-Piece Power Cable Connection (3/8" x 24 Right Hand Male) to Power Supplies with Small Gas-Thru DINSE Connection.LEN-LDTSI-917-F (056501)$30.02 -
Baffle Tube
$22.2621374 Baffle Tube Amps for ESAB®/L-Tec® PCM-100/PCM-875/PCM-1125/ESP-100i Systems with PT-20AM Plasma Arc Cutting Torches. Parts View Reference Number: 5 Priced and Sold Individually. Performance Proven™...21374$22.26 -
Tip - 100 Amp - Shielded (Pack of 5)
$17.23169226 Priced Individually, Sold in Packages of 5. Tip - 100 Amps - Shielded for Miller® Spectrum 1000/Spectrum 1250 Systems with ICE-70/ICE-70M/ICE-100/ICE-100M Plasma Arc Cutting Torches. Parts View Reference Number: 7 Performance...169226$17.23 -
Water Swirl Ring - N2
$12.062075584 Water Swirl Ring - N2 for ESAB®/L-Tec® PCM-8/ESP-300/ESP-400/ESP-600/ESP-1000 Systems with PT-15/PT-15XL Plasma Arc Cutting Torches. Parts View Reference Number: 4 Priced and Sold Individually. Performance Proven™...2075584$12.06 -
Gouging Tip - 073"
$7.258-7506 Priced Individually, Sold in Packages of 5. Gouging Tip - 073" for the following Thermal Dynamics® Systems & Plasma Arc Cutting Torches:System - TorchPakMaster® 75XL Plus - PCH/M-60PakMaster 75/75XL/100XL Plus/EconoPak 100 -...8-7506$7.25 -
Gouging Shield Cup - 9-5774
$32.229-5774 Gouging Shield Cup for Thermal Dynamics® Merlin PAK 15XC Systems with PCH/M-150 Plasma Arc Cutting Torches. Parts View Reference Number: 1d Priced and Sold Individually. Performance Proven™ Replacement for Thermal...9-5774$32.22 -
Swirl Ring - 40 Amp
$21.28020950 Priced Individually, Sold in Packages of 2. Swirl Ring - 40 Amps for Hypertherm® MAX 100D - PAC 160 Plasma Arc Cutting Torch. *Note: Image depicts similar swirl ring.Parts View Reference Number: 16 Performance Proven™ Replacement for...020950$21.28 -
Swirl Ring - 020194
$18.20020194 Priced Individually, Sold in Packages of 2. Swirl Ring for Hypertherm® MAX 70/MAX 80/MAX 100 - PAC 130 Plasma Arc Cutting Torch. Parts View Reference Number: 13 Performance Proven™ Replacement for Hypertherm® MAX 70/MAX 80/MAX...020194$18.20 -
O-Ring
$2.2885W51 O-Ring for the following ESAB®/L-Tec® Plasma Arc Cutting Torches: System - Torch PCM-750i - PT-23 PCM-750i/PCM-875/PCM-1000i/PCM-1125/Handy Plasma 70/LPH-50 & 80 Power Cut - PT-27 Additional Part Number Reference:...85W51$2.28 -
Electrode - 192047
$16.48192047 Priced Individually, Sold in Packages of 5. Electrode for Miller® Spectrum 650 Cutforce, Spectrum 701 & Spectrum 2050 Systems with ICE-50C/ICE-50CM Plasma Arc Cutting Torches. Parts View Reference Number: 7 Performance Proven™...192047$16.48 -
70° Hand Torch Body - 20072
$499.7520072 70° Hand Torch Body. (Without Safety) For ESAB®/L-Tec® PT31 & PT31XL Style Torch on PCM-500i / 875 Plasma Arc Cutting Machines. *NOTE: Replacement Torch Body does not use Plunger (part #20324) -- or Seat (part...20072$499.75 -
250 Amp Large Dinse Style Machine Connector - Black/Red Set
$30.58LDP-50M Machine Connector - Black/Red Set Large DINSE Style Connector, 1/2" (12.7mm) pin size. These 250 Amp rated cable connectors attach to the cable using a single, oval-point screw, and accept cable sizes #4 - 1/0 (25-50mm2), and...LEN-LDP-50M (05309)$30.58 -
250 Amp Large Dinse Style Machine Connector - Red
$15.00LDP-50M Machine Connector - Red Large DINSE Style Connector, 1/2" (12.7mm) pin size. This 250 Amp rated cable connector attaches to the cable using a single, oval-point screw, and accept cable sizes #4 - 1/0 (25-50mm2), and have a...LEN-LDP-50M (05304)$15.00 -
250 Amp Large Dinse Style Machine Connector - Black
$15.00LDP-50M Machine Connector - Black Large DINSE Style Connector, 1/2" (12.7mm) pin size. This 250 Amp rated cable connector attaches to the cable using a single, oval-point screw, and accept cable sizes #4 - 1/0 (25-50mm2), and have a...LEN-LDP-50M (05303)$15.00 -
Shield Cup - Long Life
$27.009-6503 Heavy-Duty Copper Shield Cup. Note: To be used in conjunction with 9-6003 Shield Cup. For the following Thermal Dynamics® Systems & Plasma Arc Cutting Torches: System - Torch EconoPak 50 - PCH-26 PakMaster 50XL/50XL Plus -...9-6503$27.00 -
Gouging Swirl Ring
$20.40020750 Gouging Swirl Ring for Hypertherm® MAX 100D - PAC 160 Plasma Arc Cutting Torch. *Note: Image depicts similar swirl ring. Parts View Reference Number: 17 Priced and Sold Individually. Performance Proven™ Replacement for...020750$20.40 -
N2 Nozzle - .166" (4.21mm)
$17.00020282 N2 Nozzle - .166" (4.21mm) for the following Hypertherm® Systems & Plasma Arc Cutting Torches: System - Torch HT4001 - PAC 620 PAC 600 - PAC 600 Parts View Reference Number: 2 Priced and Sold Individually...020282$17.00 -
Extended Electrode - 020564-PAC130
$9.42020564 Priced Individually, Sold in Packages of 5. Extended Electrode for Hypertherm® MAX 70/MAX 80/MAX 100 - PAC 130 Plasma Arc Cutting Torch. *Note: Image depicts Air/Nitrogen Electrode.Parts View Reference Number: 14 Performance Proven™...020564-PAC130$9.42 -
Extended Electrode - 192048
$17.52192048 Priced Individually, Sold in Packages of 5. Extended Electrode for Miller® Spectrum 650 Cutforce, Spectrum 701 & Spectrum 2050 Systems with ICE-50C/ICE-50CM Plasma Arc Cutting Torches. Parts View Reference Number: 8 Performance...192048$17.52 -
Tip - 80 Amp - Shielded
$17.03169219 Priced Individually, Sold in Packages of 5. Tip - 80 Amps - Shielded for Miller® Spectrum 1000/Spectrum 1250 Systems with ICE-70/ICE-70M/ICE-100/ICE-100M Plasma Arc Cutting Torches. Parts View Reference Number: 7 Performance Proven™...169219$17.03 -
Extended Electrode - Air
$9.42020564 Priced Individually, Sold in Packages of 5. Extended Electrode - Air for Hypertherm® MAX 100D - PAC 160 Plasma Arc Cutting Torch. *Note: Image depicts similar electrode.Parts View Reference Number: 18 Performance Proven™...020564-PAC160$9.42 -
PWM 300 Pro Accessory Kit
$834.00PAW-PWM300-PRO Pro Parts Kit for PWM-300 Plasma Arc Series Torches. The ultimate box of high-performance PWM 300 torch parts. Everything you need to setup your plasma arc welding machine to get the best quality...PAW-PWM300-PRO$834.00 -
Oxy Retaining Cap - 200 Amp
$119.24220238 Oxy Retaining Cap - 200 Amps for the following Hypertherm® Systems & Plasma Arc Cutting Torches: System - Torch MAX 200 - PAC 200 HT2000 - HT2000 *Note: Part is compatible with Hy Speed® HT2000 Plasma Arc...220238$119.24 -
Flat Bill Style Copper Ground Clamp
$26.44 - $48.00Flat Bill Copper Ground Clamp (Select Clamp Size From Drop Down Menu Above) Part # Amperage Cable Capacity Connection Type Jaw Opening Weight LEN-200 (02010) 200 Amp #4 - 1/0...$26.44 - $48.00 -
Liner with O-Ring - 8-4154
$25.888-4154 Liner with O-Ring for Thermal Dynamics® Thermal Dynamics® PAK® 5/10/22 Systems with PCH/M-4b/4bt. Parts View Reference Number: 5 Priced and Sold Individually. Performance Proven™ Replacement for Thermal Dynamics®...8-4154$25.88 -
Electrode Adaptor - PT-20AM
$52.7821332 Electrode Adaptor for ESAB®/L-Tec® PCM-100/PCM-875/PCM-1125/ESP-100i Systems with PT-20AM Plasma Arc Cutting Torches. Parts View Reference Number: 6 Priced and Sold Individually. Performance Proven™ Replacement...21332$52.78 -
N2 Nozzle - .166" (4.21mm) - Bevel
$32.33120387 N2 Nozzle - .166" (4.21mm) - Bevel for Hypertherm® HT 4001/PAC 620 Plasma Arc Cutting Torch. Parts View Reference Number: 2 Priced and Sold Individually. Performance Proven™ Replacement for Hypertherm® HT...120387$32.33 -
Lenco Copper Cable Splicers - Sizes #1 to 4/0
$2.28 - $4.00Lenco Crimp-On Style Cable Splicers (Select Wire Size From Options Above) These heavy duty cable splicers are made from copper tubing, and are ideal for connecting broken lengths of cable, making repairs, and connecting cables for longer runs. They can...$2.28 - $4.00 -
Extended Electrode - Nitrogen
$7.48020887 Priced Individually, Sold in Packages of 5. Extended Electrode - Nitrogen for Hypertherm® MAX 100D - PAC 160 Plasma Arc Cutting Torch. *Note: Image depicts similar electrode.Parts View Reference Number: 18 Performance Proven™ Replacement...020887$7.48 -
Swirl Ring - 169222
$54.68169222 Priced Individually, Sold in Packages of 2. Swirl Ring for Miller® Spectrum 1000/Spectrum 1250 Systems with ICE-70/ICE-70M/ICE-100/ICE-100M Plasma Arc Cutting Torches. Parts View Reference Number: 8 Performance Proven™ Replacement...169222$54.68 -
Swirl Ring - 177886
$55.78177886 Swirl Ring for Miller® Spectrum 650 Cutforce, Spectrum 701 & Spectrum 2050 Systems with ICE-50C/ICE-50CM Plasma Arc Cutting Torches. Parts View Reference Number: 9 Priced and Sold Individually. Performance Proven™...177886$55.78 -
350 Amp Large Dinse Style Machine Connector - Black/Red Set
$30.00LDP-70M Machine Connector - Black/Red Set Large DINSE Style Connector, 1/2" (12.7mm) pin size. These 350 Amp rated cable connectors attach to the cable using a single, oval-point screw, and accept cable sizes #1/0 - 2/0 (50-70mm2), and...LEN-LDP-70M (05319)$30.00 -
350 Amp Large Dinse Style Machine Connector - Red
$15.00LDP-70M Machine Connector - Red Large DINSE Style Connector, 1/2" (12.7mm) pin size. This 350 Amp rated cable connector attaches to the cable using a single, oval-point screw, and accept cable sizes #1/0 - 2/0 (50-70mm2), and have a...LEN-LDP-70M (05314)$15.00 -
350 Amp Large Dinse Style Machine Connector - Black
$15.00LDP-70M Machine Connector - Black Large DINSE Style Connector, 1/2" (12.7mm) pin size. This 350 Amp rated cable connector attaches to the cable using a single, oval-point screw, and accept cable sizes #1/0 - 2/0 (50-70mm2), and have a...LEN-LDP-70M (05313)$15.00 -
Retaining Cap - 50 Amp
$163.64120185 Retaining Cap - 50 Amps for Hypertherm® HT2000 System - HT2000 Plasma Arc Cutting Torch. *Note: Part is compatible with Hy Speed® HT2000 Plasma Arc Cutting Torches. Parts View Reference Number: 2 Priced and Sold...120185$163.64 -
Miller Small Gas-Thru DINSE Connector
$25.75MIL-273483 (Replaces MIL-195234, formerly Weldcraft Part #QCS-6GT) Small Gas-Thru DINSE Connector, .355" (9.0mm) Male End. For Air-Cooled TIG Torches with One-Piece Power Cable Connection (3/8" x 24 Right Hand Male) to Power Supplies...MIL-273483$25.75 -
PWM 300 Gas Distributor, Insulating Sleeve
$145.138-6651 Gas Distributor, Insulating Sleeve. Arc-Zone Performance Proven™ Replacement for Thermal Dynamics® PWM 300 Plasma Arc Welding Torch. Priced and Sold Individually.8-6651$145.13