Everlast RedSabre 2000X – Handheld Fiber Laser Welder, Cutter & Cleaner

Portable laser welding, cutting, and surface cleaning from one compact system.
The Everlast RedSabre 2000X combines high-speed fiber laser performance with welding, cutting, and rust or paint removal capability. Its refrigeration-cooled design reduces the size and weight typically associated with high-output laser equipment while supporting extended operation for demanding commercial applications.

The system includes the attachments and lenses needed for all three processes. Depending on the application, the operator only needs to provide compatible MIG-style filler wire, shielding gas, or compressed air.

For manual operation only. This system is not intended for automated, robotic, CNC, or computer-controlled applications.

Why Shops Choose the RedSabre 2000X

• Three Processes in One: Weld, cut, and remove rust or paint using one compact system.
• Portable Design: Reduces the size and weight associated with traditional high-output laser equipment.
• Extended Operation: Refrigeration cooling supports a 100% duty cycle with a listed 12-hour rating at maximum output.
• Fast Travel Speed: Welding speeds may reach approximately 5 inches per second, depending on the material and settings.
• Wire-Fed or Autogenous Welding: Add filler wire when needed or create fusion welds without filler metal.
• Complete Process Package: Includes the handheld gun, synchronized wire feeder, lenses, nozzles, and starter consumables.

Key Features

• GW-powered optical pump
• 2500-watt fiber laser output
• 240V input power
• 20-amp rated input
• Class 4 laser system
• Refrigeration-cooled design
• 100% duty cycle with a listed 12-hour rating at maximum output
• Detachable touchscreen color LCD control
• Ergonomic SUP21T handheld laser gun
• Fatigue-reducing gun angle and molded grip
• 30' handheld laser-gun cable
• Synchronizing wire feeder
• Welding, cutting, and surface-cleaning capability
• Supports autogenous welding without filler wire
• Argon or Nitrogen shielding gas for welding
• Compressed air or Nitrogen for cutting
• Typical welding gas-flow rate of approximately 30 CFH
• Travel speed up to approximately 5 inches per second, depending on the application

Welding & Cutting Capacity

Actual welding depth, cutting capacity, travel speed, and process results depend on material type, alloy, joint design, fit-up, surface condition, shielding gas, focal setup, filler wire, and operator technique.

What’s Included

• RedSabre 2000X Fiber Laser System
• Synchronizing Wire Feeder Attachment
• Ergonomic SUP21T Handheld Laser Gun with 30' Cable
• Detachable Touchscreen Color LCD Control
• Starter Consumables Kit
• Welding Nozzles
• Cleaning Nozzles
• Cutting Nozzles
• D18T2 Protective Lens Kit, 5 Pieces
• D20T4.5 F800 Focus Lens
• Data Cable
• Laser Safety Goggles
• System Key

Not Included: Filler wire, shielding gas, and compressed air must be supplied separately.

Laser Welding Capability

The RedSabre 2000X supports both filler-wire and autogenous welding. The included synchronized wire feeder can add MIG-style filler wire for applications that require improved gap bridging, weld buildup, or added reinforcement.

When joint fit-up and application requirements allow, the system can also produce autogenous welds by directly fusing the base materials without added filler metal.

Laser Cutting Capability

The included cutting nozzles and optics allow the RedSabre 2000X to cut compatible materials using compressed air or Nitrogen. Cutting capacity depends on material type, thickness, surface condition, focal setup, and process settings.

Laser Cleaning & Descaling

With the included cleaning attachments, the RedSabre 2000X can remove rust, paint, coatings, and surface contamination. This makes it useful for weld preparation, maintenance, restoration, and cleaning metal before refinishing.

Ideal Applications

• Commercial fabrication
• Light-to-medium production welding
• Sheet-metal fabrication
• Stainless-steel fabrication
• Aluminum fabrication
• Automotive and motorsports work
• Industrial maintenance
• Metal cutting
• Rust and paint removal
• Weld preparation
• Repair and surface restoration

Recommended Materials

The supplied product information lists this machine for all material types. Process suitability and capacity should be confirmed for the specific alloy, thickness, joint design, and application before operation.

Electrical & Facility Preparation

Before ordering, confirm that the facility has the correct electrical service, grounding, circuit protection, ventilation, shielding-gas supply, compressed-air capacity, and laser-safe operating area.

Electrical installation and final connections should be reviewed and completed by qualified personnel according to the manufacturer’s instructions.

Important Laser Safety Requirements

The RedSabre 2000X is a Class 4 industrial laser system. Class 4 lasers can cause serious eye injury, skin injury, fires, and exposure hazards from both direct and reflected laser energy.

• Operators must complete appropriate laser-safety training before use
• A controlled laser work area and suitable shielding are required
• Use only eye and face protection rated for the system’s listed 1080nm wavelength
• Standard welding helmets and cutting shades are not acceptable substitutes for properly rated laser protection
• Nearby workers and visitors must be protected from direct and reflected laser energy
• Commercial facilities may need a trained Laser Safety Officer
• Additional employee and operator training may be required
• Combustible materials, fumes, and fire hazards must be controlled
• Follow all manufacturer installation, operation, inspection, and maintenance instructions

The included laser safety goggles are only one part of a complete laser-safety program. They do not replace proper shielding, controlled access, engineering controls, training, and application-specific protective equipment.

Regulatory & Insurance Considerations

1. Laser operation in the United States may be subject to FDA requirements and applicable OSHA and ANSI standards.
2. State or local registration, permitting, or reporting requirements may apply before installation or operation.
3. Contact the appropriate state and local authorities before purchase to identify applicable requirements.
4. Commercial users may need a qualified Laser Safety Officer and documented employee training.
5. Independent laser-safety companies can provide operator and Laser Safety Officer training.
6. Confirm insurance coverage for Class 4 laser operation before installing the system.

Who Is the RedSabre 2000X Best For?

The RedSabre 2000X is intended for commercial and industrial operations that need portable manual laser welding, cutting, and surface cleaning. It is best suited for facilities with trained operators, suitable electrical service, formal laser-safety procedures, and applications involving light-to-medium-gauge materials.

Frequently Asked Questions

Can the RedSabre 2000X weld, cut, and clean metal?
Yes. It includes the attachments, nozzles, and lenses required for manual welding, cutting, and rust or paint removal.

Does the system include a wire feeder?
Yes. A synchronizing wire feeder is included for filler-wire welding.

Can it weld without filler wire?
Yes. It can produce autogenous welds when the material, joint fit-up, and application permit direct fusion without added filler metal.

What gas does it use?
The supplied information lists Argon or Nitrogen for welding. Cutting can use compressed air or Nitrogen.

Can it be used with CNC equipment or automation?
No. This model is intended for manual operation only and is not designed for automated or computer-controlled applications.

What cooling system does it use?
It uses refrigeration cooling rather than a conventional external water-cooling platform.

Is laser-safety training required?
Yes. This is a Class 4 laser system and requires trained operators, properly rated protective equipment, controlled access, shielding, and formal safety procedures.