Everlast RedSabre 1250 – 1250-Watt Tabletop Fiber Laser Welder, Cutter & Cleaner

Compact laser welding, cutting, and surface cleaning for portable manual operation.
The Everlast RedSabre 1250 combines a 1250-watt fiber laser with welding, cutting, and rust or paint removal capability in a compact tabletop system. Its air-cooled design eliminates the need for a large external water-cooling system, helping reduce the machine’s footprint and overall weight for easier placement and movement around the shop.

Designed for 240V single-phase power, the RedSabre 1250 includes a built-in touchscreen color display, ergonomic handheld laser gun, wire feeder, lenses, nozzles, and starter consumables. Depending on the process, the operator supplies compatible filler wire, shielding gas, or compressed air.

For manual operation only. This system is not intended for automated, robotic, CNC, or computer-controlled applications.

Why Shops Choose the RedSabre 1250

• Three Processes in One: Weld, cut, and remove rust or paint using one compact system.
• Tabletop Design: A 66 lb. platform provides a smaller footprint than many traditional fiber laser systems.
• Air-Cooled Operation: Eliminates the need for a bulky external water-cooling system.
• Extended Operating Capability: Listed for a 100% duty cycle for up to six hours at maximum output.
• Wire-Fed or Autogenous Welding: Use filler wire when required or directly fuse properly fitted base materials.
• Complete Manual Package: Includes the handheld gun, wire feeder, process nozzles, lenses, and starter consumables.

Key Features

• 1250-watt fiber laser output
• GW-powered optical pump
• 240V single-phase, 50/60 Hz input
• 18-amp input with 4500-watt maximum input
• Class 4 laser system
• Compact tabletop design
• Air-cooled operation
• Built-in touchscreen color LCD controls
• Ergonomic handheld laser gun
• 30' handheld gun cable
• Wire feeder included
• Welding, cutting, and surface-cleaning capability
• Supports autogenous welding without filler wire
• Argon or Nitrogen shielding gas for welding
• Compressed air or Nitrogen for cutting
• Typical welding gas-flow rate of approximately 30 CFH
• Travel speed up to approximately 5 inches per second, depending on material and settings
• 100% duty cycle with a listed six-hour rating at maximum output

Welding & Cutting Capacity

Actual welding depth, cutting capacity, travel speed, and process results depend on material type, alloy, joint design, fit-up, surface condition, shielding gas, focal setup, filler wire, and operator technique.

What’s Included

• RedSabre 1250 Fiber Laser System
• Ergonomic Handheld Laser Gun with 30' Cable
• Built-In Touchscreen Color LCD Control
• Wire Feeder
• Starter Consumables Kit
• Welding Nozzles
• Cleaning Nozzles
• Cutting Nozzles
• Spare Protective Lens Kit, 5 Pieces
• D20F50CT 3.5 Collimation Lens with 50mm Focal Length
• D20F150CT 3.5 Focus Lens with 150mm Focal Length, Installed
• Data Cable
• Laser Safety Goggles
• System Key

Not Included: Filler wire, shielding gas, and compressed air must be supplied separately.

Laser Welding Capability

The RedSabre 1250 supports both filler-wire and autogenous welding. The included wire feeder can deliver compatible filler wire when the application requires improved gap bridging, weld reinforcement, or added material.

When joint fit-up and application requirements allow, the system can also produce autogenous welds by directly fusing the base materials without added filler metal.

Laser Cutting Capability

The included cutting nozzles and optics allow the RedSabre 1250 to cut compatible metals using compressed air or Nitrogen. Cutting capacity depends on material type, thickness, surface condition, focal setup, and operating parameters.

Laser Cleaning & Descaling

With the included cleaning attachments, the system can remove rust, paint, coatings, and surface contamination. This makes it useful for weld preparation, repair, maintenance, restoration, and cleaning metal before refinishing.

Ideal Applications

• Commercial fabrication
• Sheet-metal fabrication
• Light production welding
• Stainless-steel fabrication
• Aluminum fabrication
• Automotive and motorsports work
• Industrial maintenance
• Metal cutting
• Rust and paint removal
• Weld preparation
• Repair and surface restoration

Recommended Materials

The supplied product information lists this system for all material types. Confirm suitability for the specific alloy, thickness, joint design, and process before operation.

Electrical & Facility Preparation

Before purchase, confirm that the facility has suitable 240V single-phase electrical service, grounding, circuit protection, ventilation, shielding-gas supply, compressed-air capacity, and a controlled laser work area.

Electrical installation and final connections should be completed by qualified personnel according to the manufacturer’s instructions.

Important Laser Safety Requirements

The RedSabre 1250 is a Class 4 industrial laser system. Class 4 lasers can cause serious eye injury, skin injury, fire hazards, and exposure risks from direct or reflected laser energy.

• Operators must complete appropriate laser-safety training before use
• A controlled laser work area and suitable shielding are required
• Use only eye and face protection rated for the listed 1080nm wavelength
• Standard welding helmets and cutting shades are not substitutes for properly rated laser protection
• Nearby workers and visitors must be protected from direct and reflected laser energy
• Commercial facilities may need a trained Laser Safety Officer
• Additional employee and operator training may be required
• Combustible materials, fumes, and fire hazards must be controlled
• Follow all manufacturer installation, operation, inspection, and maintenance instructions

The included laser safety goggles are only one part of a complete laser-safety program. They do not replace shielding, controlled access, training, engineering controls, or other required protective equipment.

Regulatory & Insurance Considerations

1. Laser operation in the United States may be subject to FDA requirements and applicable OSHA and ANSI standards.
2. State or local registration, permitting, or reporting requirements may apply.
3. Contact the appropriate state and local authorities before purchase to identify applicable requirements.
4. Commercial users may need a qualified Laser Safety Officer and documented employee training.
5. Independent laser-safety providers can provide operator and Laser Safety Officer training.
6. Confirm insurance coverage for Class 4 laser operation before installing the system.

Who Is the RedSabre 1250 Best For?

The RedSabre 1250 is intended for commercial and industrial operations that need a compact manual laser system for welding, cutting, and surface cleaning. It is best suited for trained operators working with light-gauge materials in facilities with suitable electrical service and formal laser-safety procedures.

Frequently Asked Questions

Can the RedSabre 1250 weld, cut, and clean metal?
Yes. It includes the nozzles, optics, and starter consumables required for manual welding, cutting, and rust or paint removal.

Does it use water cooling?
No. This model uses an air-cooled design instead of a large external water-cooling system.

Does the package include a wire feeder?
Yes. A wire feeder is included for filler-wire welding.

Can it weld without filler wire?
Yes. It can create autogenous welds when the material, joint fit-up, and application allow direct fusion without filler metal.

What gas does it use?
The supplied information lists Argon or Nitrogen for welding. Cutting can use compressed air or Nitrogen.

Can it be used with CNC equipment or automation?
No. This model is intended for manual operation only and is not designed for automated or computer-controlled applications.

Is laser-safety training required?
Yes. This is a Class 4 laser system and requires trained operators, properly rated protective equipment, controlled access, shielding, and formal safety procedures.

FDA Information

• FDA Accession Number: 2420545-000
• FDA Product Code: 95R--FF